High-Efficiency Gas Furnace
 |
| Click here
to view complete brochure (PDF format, 1MB) |
Models: PV9-UP
Tonnage Capacities:
040 - 120 Input Mbh
Efficiency: up
to 94% AFUE
Warranty: Heat
Exchanger - Lifetime; Other parts - 5 Years
Affinity PV9 Upflow 2-Stage
ECM Furnace
These Category IV, highly efficient, compact,
condensing type furnaces are designed for residential
and commercial installations in a basement, closet,
alcove, recreation room or garage where the ambient
temperature is above 32 deg F, or higher. They
may be either side wall or thru-roof vented using
approved plastic type combustion air and vent
piping. All units are factory assembled, wired
and tested to assure dependable and economical
installation and operation.
Special Benefits
- Compact, easy to install, ideal height 40"
cabinet.
- Hi-tech tubular aluminized steel primary heat
exchanger.
- Secondary (condensing) heat exchanger of 29-4C
high grade stainless steel.
- Two stage heating operation includes:
- Two stage gas valve
- Two stage inducer operation
- Variable speed ECM blower operation
- 100% shut off main gas valve for extra safety.
- Built-in, high level self diagnostics with
fault code display.
- Provides increased comfort level & very
quiet unit operation.
- Adjustable delay timer allows two stage operation
with single stage thermostat.
- Blower-off delay for cooling SEER
improvement.
- Easy to connect power/control wiring.
- Low unit amp requirement for easy replacement
application.
- Integrated control module for reliable, economical
operation.
- High velocity filter and side-return filter
rack provided for easy field installation.
- May be installed as either two-pipe (sealed
combustion) or single pipe vent (using indoor
combustion).
- Top intake & vent connection allows installation
in narrow locations.
- Electronic Hot Surface Ignition saves fuel
cost with increased dependability and reliability.
- Induced combustion system with inshot main
burners for quiet, efficient operation.
- No special vent termination kit required.
- 24v, 40VA control transformer and blower relay
supplied for add-on cooling.
- Timed on, adjustable off blower capability
for maximum comfort.
- Solid removable bottom panel allows easy application.
- Easy access from front of unit for cleaning,
maintenance or service.
- Protection from intake, exhaust or condensate
blockage.
- Insulated blower compartment for quiet operation.
- ClimatraK comfort system allows dealers to
customize setting based on regional location.
|
| Click here
to view complete brochure (PDF format, 382KB) |
Models: GY9S-UP
Tonnage Capacities:
60-120 Mbh Input
Efficiency: 92%
AFUE
Warranty: Heat
Exchanger - Lifetime; Other parts - 5 Years
Affinity PV9 Upflow 2-Stage
ECM Furnace
These Category IV, highly efficient, compact,
condensing type furnaces are designed for residential
and commercial installations in a basement, closet,
alcove, recreation room or garage where the ambient
temperature is above 32 deg F, or higher. They
may be either side wall or thru-roof vented using
approved plastic type combustion air and vent
piping. All units are factory assembled, wired
and tested to assure dependable and economical
installation and operation.
Special Benefits
- Electronic Hot Surface Ignition saves fuel
cost with increased dependability and reliability.
- Compact, easy to install, ideal height 40"
cabinet.
- Built-in, high level self diagnostics with
fault code display.
- 100% shut off main gas valve for extra safety.
- Hi-tech tubular aluminized steel primary heat
exchanger.
- Secondary (condensing) heat exchanger of 29-4C
high-grade stainless steel.
- Integrated control module for reliable, economical
operation.
- Blower-off delay for cooling SEER improvement.
- Easy to connect power/control wiring.
- Low unit amp requirment for easy replacement
application.
- May be installed as either two-pipe (sealed
combustion) or single pipe vent (using indoor
combustion air).
- Top intake & vent connection allows installation
in narrow locations.
- Induced combustion system with inshot main
burners for quiet, efficient operation.
- No special vent termination kit required.
- PSC 4-speed, direct drive motor with large,
quiet blower.
- 24V, 40VA control transformer and blower relay
supplied for add-on cooling.
- Timed on, adjustable off blower capability
for maximum comfort.
- Solid removable bottom panel allows easy application.
- Easy access from front of unit for cleaning,
maintenance or service.
- Protection from intake, exhaust or condensate
blockage.
- High velocity filter provided for field installation.
- Side return filter rack provided for field
installation.
Mid-Efficiency Gas Furnace
Models:
PV8-UH
Tonnage Capacities:
060 - 120 Input Mbh
Efficiency: 80%
AFUE
Warranty: Heat
Exchanger - 20 Years; Other parts - 5 Years
Affinity PV8 Upflow/Horizontal
2 Stage ECM Furnace
These high efficiency, compact units employ induced
combustion, reliable hot surface ignition and
high heat transfer aluminized tubular heat exchangers.
The units are factory shipped for installation
in upflow or horizontal applications.
These furnaces are designed for residential installation
in a basement, closet, alcove, attic, recreation
room or garage and are also ideal for commercial
applications. All units are factory assembled,
wired and tested to assure safe dependable and
economical installation and operation.
These units are Category I listed and may be
common vented with another gas appliance as allowed
by the National Fuel Gas Code.
Special Benefits
- Compact, easy to install, ideal height 40"
cabinet.
- Hi-tech tubular aluminized steel primary heat
exchanger.
- Two stage heating operation includes:
- Two stage gas valve
- Two stage inducer operation
- Variable speed ECM blower operation
- Built-in, high level self diagnostics with
fault code display.
- 100% shut off main gas valve for extra safety.
- Electronic Hot Surface Ignition saves fuel
cost with increased dependability and reliability.
- Provides increased comfort level and very
quiet unit operation.
- Field selectable delay timer allows two stage
operation w/single stage thermostat.
- Accoustically insulated blower compartment
for reduced blower sound level.
- Blower off delay for cooling SEER
improvement.
- Easy to connect power/control wiring.
- Low unit amp requirement for easy replacement
application.
- Integrated control module for reliable, economical
operation.
- High velocity filter and side-return filter
rack provided for easy field installation.
- Induced combustion system with inshot main
burners for quiet, efficient operation.
- Variable speed ECM with large, quiet blower.
- ClimaTrak Technology allows dealer to customize
comfort settings based on regional location.
- 24V, 40VA control transformer and blower relay
supplied for add-on cooling.
- Timed on, adjustable off blower capability
for maximum comfort.
- Solid removable bottom panel allows easy application.
- Easy access from front of unit for cleaning,
maintenance or service.
- Insulated blower compartment for quiet operation.
- Independent door removal for greater durability
and ease of access.
- LoNox models have been designed to meet specific
code requirements.
- LoNox models may not be converted to propane.
 Models:
GY8S-UH / LY8S-UH
Tonnage Capacities:
040 - 140 Input Mbh
Efficiency: 80%
AFUE
Warranty: Heat
Exchanger - 20 Years; Other parts - 5 Years
Latitude GY8/LY8 Upflow/Horizontal
Single Stage Furnace
These high efficiency, compact units employ induced
combustion, reliable hot suface ignition and high
heat transfer tubular heat exchangers. The units
are factory shipped for installation in upflow
or horizontal applications.
These furnaces are designed for residential installation
in a basement, closet, alcove, attic, recreation
room or garage and are also ideal for commercial
applications. All units are factory assembled,
wired and tested to assure safe dependable and
economical installation and operation.
These units are Category I listed and may be
common vented with another gas appliance as allowed
by the National Fuel Code.
Special Benefits
- Efficiency ratings of 80 AFUE attained by
using tubular heat exchangers.
- Compact 40" height allows installation
in small space confines.
- Electronic hot surface ignition with high
reliability and dependability.
- 100% shut off main gas valve for added safety
- High quality inducer motor for quiet operation.
- Built-in self diagnostics with fault code
display.
- Easily appied in upflow, horizontal left or
horizontal right installation with no conversion
necessary.
- Rollout safety control
- Low unit amp requirement for easy application.
- High velocity filter provided for field installation.
- Standard terminals for controlling humidifiers
and EAC's
- 40VA control transformer fuse protected.
- Easy to connect power and control wiring.
- Cooling relay supplied for easy installation
of add-on cooling.
- Multi-speed PSC, direct-drive blower motors
to match cooling requirements.
- Adjustable fan-off settings to eliminate "cold-blow".
- LoNox models have been designed to meet specific
code requirements. LoNox units may not be converted
to propane.
|
